|
|
FISHING APPLICATIONS
Thousands of anglers currently use Salt-Away and have used it for years.
It takes less than 1 minute to flush salt from your outboard, I/O or inboard engine.
Use the remainder of the Salt-Away in the container to spray the salt off your fishing boat.
The 115ml cup on Salt-Away's unique dispenser will flush an engine and wash a boat and trailer up to 10 metres length.
At the end of the day, lay your rods and reels on the deck and spray them off using Salt-Away's
Combo Kit.
Use a bucket with 6-10 litres of water and put 10-15ml of Salt-Away per litre of water in the bucket. Use this solution to
wash of fishy, bloody, salty hands and keep your other tackle from becoming contaminated with salt.
Put your tackle into the pail until ready to remove to dry. Solution will not rust the tackle. This solution can be used over
and over at your discretion.
Use the 472ml Professional Strength Spray while out to sea to remove the salt from your rod, reel, guides
and line as you fish.
There is no need to rinse while it is being used, and it keeps the salt from building on the line and your reel.
No extra clean-up is required when you get home.
Monofilament line and spectra were tested for 3 months in a Salt-Away solution 5 times the concentration recommended for
ordinary use. After the 3 months, strength tests were performed by approved strength test equipment. There was no change from the
manufacturer's designated test strength in these materials.
Salt-Away is completely safe to use on all brands of reels.
Salt-Away is also excellent to use on any tool used for boating and fishing. Keep them from rusting and locking up just
when you need them the most.
The best product for this application is the Salt-Away 472ml Professional Strength Spray.
|
|
|
|
