|
|
SALT-AWAY CONCENTRATE FORMULA
SALT-AWAY'S CLAIMS ABOUT ITS PERFORMANCE ONLY APPLIES TO SALT-AWAY AND THE USE OF OUR EQUIPMENT.
OUR PRODUCTS ARE GUARANTEED TO PERFORM AS WE CLAIM. USING ANOTHER PRODUCT WITH SALT-AWAY'S EQUIPMENT, IN NO WAY MEANS THAT
OTHER PRODUCTS ARE AS EFFECTIVE AS SALT-AWAY.
THE BLEND OF CHEMICALS USED IN SALT-AWAY ARE NOT THE SAME AS OUR COMPETITORS' CHEMICALS.
Special Secret Blend
Salt-Away is a carefully selected blend of ingredients specifically chosen to provide the optimum concentration of
well-known cleaning materials and surface-active agents, to provide salt removal from a wide variety of surfaces.
There are no hydrocarbon solvents in the formula and the cleaning action is designed not to remove lubricating products.
Included in Salt-Away are rinse aids and liquid and vapor corrosion inhibitors.
The ingredients are considered non-hazardous, non-toxic, and biodegradable and, as such, discharging Salt-Away into normal
drainage outlets is safe.
Safe to use on virtually all surfaces, including Magnesium, Aluminum, Iron, Steel, Stainless Steel, Chrome, Paint, Gel Coat,
Nylon, Isinglass, Vinyl, Plastic, Glass, Wood, Leather, Rubber, Canvas.
Salt-Away is also safe to use near plants, pets, children and other living things.
Salt Removing Agent
Salt-Away's salt removing agent completely removes fresh salt and breaks down salt build-up.
Its high, dense foaming action assists as an indicator to see where Salt-Away has been applied, and it also "clings" to
surfaces to slowly soak through the layers of salt.
As the salt dissolves into the Salt-Away salt removing agent, the crystals are lifted into the solution.
If Salt-Away is sprayed on the surface and not rinsed off, the water evaporates out of the solution and the salt
crystals are embedded into the residue.
The liquid and vapor corrosion inhibitors in the residue will not allow the salt crystals to attack the surface.
If Salt-Away is rinsed off the surface, the salt crystals are lifted off the surface and washed away.
A second application of Salt-Away is recommended for further protection.
Salt-Away's salt removing agent, which causes the foam, is non-hazardous.
This foam dissipates within a few minutes.
We are very concerned about environmental conditions, and we do not want our customers to perceive that any element of our
product is hazardous.
Further, we want our customers to keep a copy of our Material Safety Data Sheet (MSDS) on file. This document verifies that
Salt-Away is not hazardous and is helpful to agencies who may not be familiar with our products.
Contact Us to request an MSDS.
Rinse Aid
Salt-Away's advanced formula contains a new, popular rinse aid.
This rinse aid performs while fresh water is being applied to rinse off equipment.
While the fresh water is mixing with the Salt-Away solution, the rinse aid causes the mixture to "sheet off" the surfaces,
and keeps hard minerals from the rinse water from spotting the equipment.
Liquid and Vapor Corrosion Inhibitors
The ingredient second highest in percentage content is Salt-Away's corrosion inhibitors.
Tested for 18 months, this corrosion inhibitor works in liquid solutions and vapour solutions.
It is 100% non-hazardous and is a high-performance inhibitor which saves your equipment from rusting and corroding when
Salt-Away is used on a regular basis.
Deep, Rich Blue Colour
With this deep, rich, blue colour, it is very easy to see the strength of Salt-Away while being diluted.
Shows concentration of product.
Product Concentration and Dilution Ratio
Salt-Away is extremely concentrated.
The Salt-Away Mixing Unit was used in the vast majority of the testing performed in the development
of Salt-Away.
Salt-Away is manufactured to be dispensed from the Mixing Unit at a ratio of 512 parts water to 1 part
Salt-Away.
This dilution ratio is meant for salt water marine engine flushing and normal external salt removal on ANY surface, by means of
dispensing with the Mixing Unit connected to a standard garden hose.
Add 10-15mls of Salt-Away Concentrate to each litre of water when immersing a salt-corroded part into a solution of
Salt-Away and water.
This dilution ratio is also recommended for boaters who want to immerse the lower unit of their outboard motor into a
Salt-Away solution.
Most of our testing data show problems of salt build-up are solved by using Salt-Away at the same dilution ratio
referenced above, and repeating the application on a regular basis.
We recommend our Salt Build-up Removal Program for build-up problems.
Our recommended dilution ratio has always been 512 parts water to 1 part Salt-Away. Our New, Advanced, Enriched Formula, introduced in 2001, is much more concentrated than our Original Formula, thereby causing the Advanced Formula water ratio to Salt-Away to be much greater.
Our recommendations are intended to be conservative.
 INNOVATIVE CHARACTERISTICS
|
|
|
|
