Don’t Let Salt Corrosion Damage your Engine
There are THREE different ways you can flush Salt-Away through your inboard engine:
|Direct Injection Kit.|
|Fresh water hose connected to water in-take line using Salt-Away Auto-Mix unit.|
Auxiliary engines may be flushed in a container of Salt-Away solution.
Direct Injection Kit
The Salt-Away Direct Injection Kit fits to all moored craft to flush and protect your expensive marine engines without leaving the helm. It protects all open and closed circuit salt water cooling systems by injecting a 50/50 mixture of Salt-Away and fresh water.Salt-Away is designed to protect your engine’s cooling system even when using it with salt water.
Salt-Away is so concentrated you only use 50-80 ml every time you moor the boat costing you as little as $1.15, and could save you thousands of dollars on expensive repairs.
The Salt-Away Direct Injection Kit comes ready to install with an easy to follow instruction manual. Also included is a T fitting for most common water couplings and 5 metres of 6mm 150 psi tubing to connect the reservoir to the T fitting. No wiring is needed forward of the motor as you control the unit remotely using the remote control supplied – which attaches to your key ring.
The Salt-Away Direct Injection Kit will connect to 12V or 24V power, and has an adjustable regulating valve. Once installed all you need to do is keep the reservoir topped up with Salt-Away concentrate and flush your engine for 30 seconds after every use.
The Salt-Away Direct Injection Kit can also be purchased without the remote control unit, but this will require wiring to the manual switch supplied.
Designed for use with all outboard, inboard/outboard (stern drive) motors, the Salt-Away Direct Injection Kit will save you time and maintenance costs on your boat’s motor. You just flush your engine for 30 seconds after every use.
The Salt-Away Direct Injection Kit comes ready to install with all wiring and tubing. An additional kit is available to suit twin engines.
* Always flush your engine according to the manufacturer’s instructions.
* Once installed all you need to do is keep the reservoir topped up with Salt-Away
concentrate and flush your engine for 30 seconds after every use.
Direct Injection Kit Video