|
|
TESTIMONIALS
The following letters are examples of the level of satisfaction users experience with Salt-Away. We welcome comments and
letters from all our customers. You can also see an independent review of Salt-Away products in wmv video format by
clicking the movie image at right.
Please find enclosed tap you kindly supplied with the Salt-Away injection unit I purchased late December 07.
I fitted the unit prior to going away before Christmas by connecting the injection points directly into the base of the raw water impellors on the
engines. The was the closest and most convenient point to the heat exchangers on the Volvo KAMD 42 engines.
As you know I used one Salt-Away injection unit and connected the engines via a "Y" junction and two valves. I then ran the engines up to temp
following the installation and gave them a good dose of Salt-Away prior to leaving for Kawau and then on to the Barrier over the holidays.
The obvious difference in running temps when the engines are at cruise revs - around 3200 RPM is at least 5 deg cooler - about 180 deg, which is
where they should ideally run given the water temps being around 23-24 deg at this time of year.
Needless to say, I am impressed and would certainly recommend the installation of these units to anyone with a launch.
I will call in and pick up another 4 litre pack next time I'm in Hamilton as with all the overnight stops we had during the trip, I am down to
less than 2 litres left!
Thank you again for your technical assistance on this occasion.
Regards,
Bruce Lewis
|
|
Click the image above for
a PDF version of this
testimonial.
|
I first started using Salt-Away products on the MV Independence in September of 2004. Using the mixer unit provided to
wash down the boat is quick and effective and I have been very impressed with the results so far. The first thing I noticed was
that there was no longer any need to squeegee the windows or chamois the stainless because these areas dried streak-free.
There has also been a marked reduction in rust and oxidation staining on the gel coat which I guess is a result of the complete removal
of salt from the metal components on the vessel. This has greatly reduced cleaning times on the vessel meaning my crew get home
earlier after a long trip north. The maintenance of the rods and reels has also been greatly reduced as there is absolutely no
build-up of salt or any related compounds which appear even with thorough fresh water washing. I am very happy with Salt-Away
and will continue to use it through-out the 2005 season.
Yours Sincerely,
Jeff Strang, Independence Charters Ltd
PO Box 487, Paihia, Bay of Islands.
Ph: 027 230 3955
Website www.sportfish.co.nz
|
|
|
I just wanted to send a quick note to let you know how well your product has worked in my boat. I have flushed my engine
with Salt-Away since I purchased the boat new in 2000. It is a Mercruiser direct drive engine that although freshwater cooled
the risers and manifolds are not in the coolant loop. Just raw water through them. I am enclosing a few pictures, one of the
risers and the other of a manifold. This engine is 6 years old and has 800 hours on it.
This is the first time I have removed the riser elbows and was shocked at how clean they are. No rust or clogs, just a
little surface build-up which was easily cleaned. The boat shop I brought them to and who checked them was also surprised at
how well they have held up. I had anticipated having to change both the risers and manifolds but ended up only needing new
gaskets to reinstall them. I will recommend your product to all my boating friends. It will save any boater money in the
long run.
Thanks for the great product.
John W Sturdivant
|
|
|
(Click on images for larger display)
|
"It's such a pleasure to find a
product that not only meets,
but exceeds it's claims."
"It is rare when one finds a product
that lives up to its claims."
"...since the first applications I have
never scrubbed salt or rust."
"We have tried this product and
now use it on all our winterizes
and motor flushings."
|
|
"Salt-Away is the best product to have
in your dive bag."
"For years I have been looking
for a product like Salt-Away."
"We performed two treatments
using the flush kit, and most
of the build-up was gone."
"After the past 18 months, there
are no signs of salt corrosion or
build-up in the engine or outdrive."
|
|
|
|
