Jump to content
Due to the govt COVID-19 restrictions we are unable to ship orders until the level 4 non-essential trading ban is lifted. You are still able to place an order however these cannot be sent until this happens.
Stay Safe from the Wholesale Marine Direct Team

Inboard Engine Flush

There are TWO ways you can flush Salt-Away through your inboard engine:

Auxiliary engines may be flushed in a flush bag filled with Salt-Away solution.

Direct Injection Kit

The Salt-Attack Direct Injection Kit is designed for all moored vessels with inboard/outboard stern drive motors to flush and protect your expensive marine engines without leaving the helm.

Salt-Away’s unique formula protects your engine’s cooling system even when using salt water.

It protects all open and closed circuit salt water cooling systems by injecting a 50/50 mixture of Salt-Away and fresh water.

There are a number of different kit options available to suit your vessels set up, ranging from a single engine flush right up to twin engines and a gen sets plus air conditioning flush. We can also customise your kits to fit your exact set up.

The Salt-Attack Direct Injection Kit comes ready to install with wiring, tubing, quick connect fittings, designed to be drilled and tap into water strainer/water pump and an easy to follow instruction manual.

The kit comes in two versions, wireless and non-wireless. Wireless model allows for easy installation as no wiring is needed forward of the motor because you control the unit remotely using the remote control supplied. Non-wireless kits come with 3 core wire and a rocker switch to be mounted at the helm.

The Salt-Attack Direct Injection Kit will connect to 12V power, and has an adjustable regulating valve. Once installed all you need to do is keep the reservoir topped up with Salt-Away concentrate and flush your engine for 30 seconds after every use.

Salt-Attack Mixer Connected To Water In-take Line

  1. Attach a fresh water hose to the Salt-Attack Mixer then connect hose and mixer to the engine cooling in-take pipe(before the water pump).
  2. Fill mixer cup with Salt-Away.
  3. Turn mixer unit to “rinse” setting and flush engine with fresh water for 5 minutes.
  4. Turn Salt-Attack mixer unit to “Salt-Away” setting and flush motor for 30-40 seconds. Turn engine off leaving the Salt-Away in the engine’s cooling system to protect the motor.

We recommend our Salt-Away Starter Kit.